RDWS-PH-MAX-14

SKU:
$1,595.00
1395 1595 $1,395.00
$1,395.00
Unavailable
RDWS-PH-MAX-14 (1-10 person household) Whole House Low pH Neutralizer & pH Correction System

Features:
  • Dimensions: 14"dia. X 65"ht - Total Height 73"
  • Service/Peak Flow Rate: 15/20gpm
  • Backwash Flow Rate: 10gpm
  • Power: 24v, 110v 60hz
  • Plumbing Size: 1" or 1.25"
  • ​​Limited Time Special: All orders will include On-The-Spot pH Test Strips - 50 single-dip testing strips for pH measurement after the PH-MAX.
​ Read about the RDWS-PH-MAX-14 premium features and specifications below.  
​ 
Free Shipping Within The Continental US
​*Appearances May Vary
​
​Limited Time RainDance Water Systems Special:
Have peace of mind and ensure your new RDWS-PH-MAX does the job with On-The-Spot pH Testing Strips! While supplies last we're including 50 pH test strips with every RDWS-PH-MAX system so you can continually test your water after your new pH correction system to see the results for yourself and keep track of replacement intervals.​​​ *Offer will end without notice.
Water with a low pH is regarded as acidic. Indications of a low acidic pH will be blue/green rings around baths and basins, cause discoloration to washing, cause corrosion to water using appliances and sometimes adversely affect color treated hair. The main problem is the damage it can do to copper plumbing and hot water tanks, as the heating of the water makes it more aggressive. The water slowly eats away at the copper plumbing and tank and eventually holes develop.

Dimensions & Specifications:
  • RDWS-PH-MAX Tank: 14"dia. X 65"ht Total Height 73"
  • Service/Peak Flow Rate: 15/20gpm
  • Backwash Flow Rate: 10gpm
  • Min. Pressure: 30psi
  • Max Pressure: 100psi
  • Power: 24v, 110v 60hz
  • Plumbing Size: 1" or 1.25" - please specify when ordering
  • System Weight: Approx 225lbs
  • Bypass: Yes, Included
  • Self Cleaning Automatic Backwashing
  • Installation Instructions: Yes, Included
  • Tech Support: Yes, Included

​Note: Due to weight and ease of maneuverability, filter tank, control valve, and correction media are shipped separately on a pallet with complete easy to understand filling and installation instructions.

Maximum Removal Capacities:
Minimum pH Level Needed: 5.0

​The RDWS-PH-MAX is our number one solution for acidic well water and low pH problems!
  • Provides low acidic pH correction typically associated with well water!
  • Prevents Bluish Green Staining on Bathroom & Kitchen Fixtures!
  • Protects plumbing, copper pipes, fixtures, and all water using appliances from low pH corrosion.
  • By neutralizing your pH the RDWS-PH-MAX will allow an iron filter to function at a greater level of filtration.
  • Simple to Install - Connects to the Incoming Main Supply Line of Your House!
  • The RDWS-PH-MAX is compatible with all of our well water iron filters, water softeners, hydrogen sulfide gas removal systems, manganese filters, and all whole house well water filtration units.

How it works:
The cylinder is installed into the water supply as near to the source as possible so that all the water from that point onwards is neutralized. Water passes into the cylinder and permeates through the pH correction media before passing out into the main water line again. The media dissolves into the water until the pH raises to a neutral level and stops dissolving once the pH is raised.

This is a self-backwashing system that automatically cleans it's filter bed. This is accomplished with the electronic control valve that is mounted on top of the tank. This valve is controlled by a timer that on a regular interval, initiates the backwash cycle that cleans the bed of pH correction media and resets it for the next period of filtration. Periodic backwashing will prevent packing, reclassify the bed and maintain high service rates. 

Calcite slowly dissolves in the water to correct the pH of your water. You will need to add more pH correction media approximately once a year depending on water chemistry and usage. Contact us for your specific application information!