Sulfate Only Sulfate Eater-125-14S High Flow

SKU:
$3,095.00
2599 3095 $2,599.00
$2,599.00
On Sale
Unavailable
per item
High Flow Large Home / Light Commercial / Livestock Sulfate ​

The RainDance Water Systems Sulfate Eater-125-14S High Flow High Capacity Sulfate Only Removal System: Premium Water Treatment - Premium Services!
  • Filters High Sulfates Up To 2,000ppm
  • Lifetime Customer Support​​ 
  • Limited Time Special: Add our exclusive Sulfate Eater Dealer Kit to your order! Find out what's inside our dealer kit by scrolling down this page.

Read about the Sulfate Eater-125-14S premium features and specifications below.
​
Free Shipping Within The Continental US
The Sulfate Eater-125-14S - Built to filter high Sulfates.
*Note: This system must installed after your existing water softener.

​Featured Blog: How Does The Sulfate Eater Work?
Model #  Sulfate Eater-125-14S Softener & Sulfate Filter (appearance & color may vary from picture)
 
System Function
Whole House / Agriculture / Livestock / Light Commercial Well Water Treatment System
  • Removes High Levels of Sulfates up to 1500ppm (mg/l)!
  • Sulfate levels reduced well below the EPA standard and in most cases non-detectable!
  • Simple to Install - Connects to the Main Water Supply Line!​
​Dimensions & Specifications:
  • Tank: 14"dia. X 65"ht Total Height 75"
  • Brine Tank: 18"x40"
  • Max. Flow Rate: 15gpm
  • Backwash Flow Rate: 6gpm
  • Power: 24v, 110v 60hz
  • System Weight: 275lbs
  • Plumbing Size: 1" OR 1.25" 
  • Bypass: Yes, Included
  • EZ-Maintenance Just add Standard Water Softener Pellets
  • Tank Jacket: Yes, Included
  • Installation Instructions: Yes, Included
  • Tech Support: Yes, Included​
​Maximum Removal Capacities:
  • 2,000ppm High Sulfate Filtration 
  • Hard water needs to be pretreated and softened below: 3gpg
  • Manganese needs to be below: 0.05ppm
  • Iron needs to be below: 0.3ppm
  • Max Pressure: 100psi
  • Min Pressure: 30psi
  • pH Level Needed: 6.0 or Greater
                              The RainDance Exclusive Sulfate Eater Dealer Kit
Be prepared like a RainDance dealer with the on-site Sulfate Eater Dealer Kit - perfect for the DIYer or hand it over to your plumber and save a little more on common installation supplies. Dealer Kits include stainless steel flex connectors, water sample bibbs, teflon tape, o-ring lube, and more. As always, our Preloaded USB Flash Drive contains all the installation instructions, diagrams, and manuals you or your installer needs for ease of installation and maintenance.
​Note: Additional plumbing materials such as pipe and fittings are not included. These materials are readily available at any hardware or home improvement retail store.

​Sulfate testing not included with our free water testing service. Contact us to find out how you can have a complete well water analysis.