pH Correction Injection System With Solution Tank
SKU:
$1,195.00
$1,045.00
$1,045.00
On Sale
per item
In Stock: YES - Free Delivery Within The Continental US
The RainDance Water Systems pH Correction Injection System - Designed to raise low pH to neutral levels.
Read about premium features and specifications below.
Free Shipping Within The Continental US
The RainDance Water Systems pH Correction Injection System - Designed to raise low pH to neutral levels.
- Provides pH correction at high flow rates and heavy water demand.
- Prevents corrosion to metal plumbing and appliances from low pH.
- Low maintenance - includes high volume 45 gallon solution tank
- Improves well water for residential homes, commercial business, agriculture, and poultry farms.
Read about premium features and specifications below.
Free Shipping Within The Continental US
|
*Limited Time Only: FREE Soda Ash Starter Bag - Soda ash is used with injection systems to neutralize low pH and correct acidic water corrosion problems. Mix soda ash with water in the high capacity solution tank to continuously treat low pH problems in well water. *This FREE Offer Will End Without Notice |
The RDWS-Feed Pump system consists of a 45 gallon solution tank and a small injection pump that is mounted above the solution tank with a pickup tube submerged into the mineral solution. The pump is plugged into a dedicated outlet wired to the switch side of the well pump switch so that it is only activated when the well pump is activated. When there is a demand for water in the household and the pressure in the pneumatic storage tank drops, the well pump and the injection pump are activated.
The injection pump feeds the proper amount of solution into the flowing stream of water with the use of a tee injector fitting that must be installed before the pneumatic storage tank. Solution mixes include chlorine/water or hydrogen peroxide/water mix to oxidize iron and sulfur bacteria as well as other well water contaminants. You can then regulate the amount of solution that is fed with the use of a feed control valve located on the pump. Take several readings until you reach your target level. The required maintenance on the system includes adding the solution mixture to the solution tank in proper measure occasionally, depending on water chemistry and usage.
The injection pump feeds the proper amount of solution into the flowing stream of water with the use of a tee injector fitting that must be installed before the pneumatic storage tank. Solution mixes include chlorine/water or hydrogen peroxide/water mix to oxidize iron and sulfur bacteria as well as other well water contaminants. You can then regulate the amount of solution that is fed with the use of a feed control valve located on the pump. Take several readings until you reach your target level. The required maintenance on the system includes adding the solution mixture to the solution tank in proper measure occasionally, depending on water chemistry and usage.
|
Dimensions & Specifications:
|
