Twin Iron Max-FX-10 Water Conditioner Iron Filter (10gpm Flow Rate)
SKU:
$3,395.00
$3,195.00
$3,195.00
On Sale
per item
Continuous Well Water Iron Filtration & Salt Free Hard Water Conditioning
NO SALT - NO CHEMICALS TO ADD
5 in 1 Space Saving Continuous Well Water Treatment: Hard Water Conditioner, Iron, Manganese, Sediment & Sulfur Odor Water Treatment For Households With 1-3 Bathrooms - No Maintenance - Automatic Self-Backwashing
NO SALT - NO CHEMICALS TO ADD
5 in 1 Space Saving Continuous Well Water Treatment: Hard Water Conditioner, Iron, Manganese, Sediment & Sulfur Odor Water Treatment For Households With 1-3 Bathrooms - No Maintenance - Automatic Self-Backwashing
- Hard Water Conditioner, Filter High Iron up to 12ppm, Manganese up to 5ppm, Hydrogen Sulfide 3ppm, 3-5 Micron Sediment Filtration.
- Free lifelong water testing to maintain optimum performance and clean clear water.
- Ships pre-loaded with media for hassle-free, quick & easy installation!
- New Upgrades Included:
- NSF 61 Certified Water Treatment Media - Yes
- NSF Certified Control Valve & Tank - Yes
- Free Installation Kit With Bypass - Yes
- Free Lifetime Water Testing - Yes
- EZ-Installation Instructions Pre-Loaded On Flash Drive - Yes
- Free 24/7 Technical Support - Yes
- 24/7 Water Leak Detector - Yes
- In Stock - Yes
Save More!
Click Here For Current Discount Codes, Military & First Responder Rebates & Special Offers
Click Here For Current Discount Codes, Military & First Responder Rebates & Special Offers
No-Maintenance, No-Salt, and No Chemicals to add. Prevent Iron Staining! The Twin Alternating Iron Max-FX tanks provide an uninterrupted supply of iron free water to your home or business. The Twin Alternating Iron Max has two tanks for filtering iron, manganese and hydrogen sulfide gas in your well water. Water is filtered in one tank while the other is in a standby mode. When the filtering capacity of the first tank is reached, the system automatically switches tanks. The first tank is then cleaned. This cycle is repeated when the second tank reaches its capacity point. The Twin Iron Max-FX-10 is designed to treat high levels of iron (ferrous and ferric), manganese, sediment, hydrogen sulfide gas odors, and can reduce the effects of hard water scale.
The Iron Max-FX well water filter does not use salts or discharge salts when backwashing. Perfect for those on septic systems! Read how the Iron Max-FX works by scrolling to the bottom of this page.
The Iron Max-FX well water filter does not use salts or discharge salts when backwashing. Perfect for those on septic systems! Read how the Iron Max-FX works by scrolling to the bottom of this page.
Model # Twin Iron Max-FX-10
Continuous Well Water Iron, Manganese, Hydrogen Sulfide Gas, Sediment Filter & Hard Water Conditioner
Continuous Well Water Iron, Manganese, Hydrogen Sulfide Gas, Sediment Filter & Hard Water Conditioner
Twin Iron Max-FX-10
Space Saving Salt-Free Iron Filter Hard Water Conditioner - No Salt Tank Needed!
|
Dimensions and Specifications:
|
Maximum Removal Capacities:
|
Free Twin Iron Max-FX Installation Kit & Accessories Included With Your Order Only From RainDance Water Systems
|
Be prepared like a RainDance dealer with the on-site Iron Max dealer kit - perfect for the DIYer or hand it over to your plumber and save a little more on common installation supplies. Dealer Kits include stainless steel flex connectors, before & after water test bibbs, iron water test kit, teflon tape, o-ring lube, and more. As always, our Preloaded USB Flash Drive contains all the installation instructions, diagrams, and manuals you or your installer need for easy installation and maintenance. Additional plumbing materials such as pipe and fittings are not included. These materials are readily available at any hardware or home improvement retail store.
|
If you're tired of hard water, iron staining, rust, manganese, sediment rotten egg odors, off color water, and metallic tasting water this system is for you!
Iron and manganese are commonly found in well waters. They can cause unsightly staining, bad tastes and at high levels they can cause problems with fixtures, appliances, and heating elements. Both can be removed to leave the water crystal clear by using the Iron Max-FX.
Clear Clean water with the Space Saving Single Tank 5 in 1 Iron Max-FX well water treatment system.
HOW THE IRON MAX-FX-10 WORKS
What is the Iron Max-FX used for?
The Iron Max-FX system has several uses. It is primarily used for well water residential applications where superior water is desired for both taste and functional use. These systems are capable of handling whole house iron filtration and stain prevention needs as well as high flow commercial applications, small and large-scale irrigation purposes, and is the perfect system to provide reliable pretreatment for a variety of filters that may otherwise be fouled by iron, such as reverse osmosis systems, UV disinfection systems, and a variety of our specialty filters. The Iron Max-FX is specially customized to include water conditioning for the prevention of hard water scale.
So how does the Iron Max-FX work?
Water flows into the valve at the top, down through the media and then up through the ‘riser’ tube in the middle of the vessel. As the water travels through the media the contaminants are removed leaving crystal clear water. The Iron Max-FX also includes an internal module to reduce the effects of hard water scale. There are timer options that can be set to automatically self clean (backwash) and wash away any of the accumulated contaminants. Cleaning can be set for a given time convenient to your lifestyle. It's as simple as that!
What exactly does the Iron Max-FX filter or remove?
The Iron Max-FX is a highly effective well water filter that simply requires a pH of 6.8 or greater for optimum performance. With this pH, the Iron Max will filter high levels of Ferrous and Ferric Iron up to 12ppm (mg/L), Manganese up to 5ppm (mg/L), Hydrogen Sulfide Gas up to 3ppm (mg/L), Sediment down to 3-5 microns, as well as unpleasant tastes and odors. Unlike many basic iron filters, this system is often used successfully to remove high levels of iron with no added chemical oxidation step. However, the addition of an oxidizer (e.g. oxygen, chlorine, ozone, hydrogen peroxide, potassium permanganate, etc.) can actually enhance the Iron Max's filtration performance. As such it is a very versatile system that can work with various water chemistry.
Will the Iron Max-FX Series soften water?
No, the Iron Max-FX Series is designed as a water conditioner as well as an iron, manganese, hydrogen sulfide gas, and suspended solids filter. To "soften water" you actually have to remove the calcium and magnesium hard water minerals. The Iron Max-FX Series does not remove the calcium or magnesium, so you will not have soft water or that "slimy" water that is associated with soft water. These systems are alternatives to salt based water softeners and perfect for customers who live in banned water softener areas or just want to Go Green! The built-in no salt magnetic module is designed to reduce the effects of hard water without chemicals.
Is there any routine maintenance involved with the Iron Max-FX?
No, the Iron Max-FX is considered a maintenance free whole house water filter. That is, there are no routine filters to replace and no chemicals or salts to add. The Iron Max will filter and clarify your water by filtering iron, manganese, hydrogen sulfide gas, and suspended solids in the water. It will also improve the taste & odor of your water. The filtration media will need to be exchanged approximately every 8 to 10 years*. This is easily accomplished with the use of a wet & dry vacuum which you use to vacuum out the old filtration media from the top of the filter. You then replace it with a new bed of filtration media which will last approximately another 8 to 10 years*. This is the only maintenance that the system will require. *Some applications may require a more frequent replacement interval. Note: The Iron Max will not treat tannins, iron bacteria, sulfur reducing bacteria, colloidal iron, or organic iron. If these bacteria's are present you will need to add an oxidizer or chlorinate your well to prevent any iron bacteria or sulfur reducing bacteria from passing through the Iron Max well water filter. Your Iron Max instructions will include easy to follow well chlorination instructions and detailed information on iron bacteria.
If the Iron Max does not use chemicals or sodium, what does it use?
Just water is needed for backwashing! The Iron Max System will oxidize and absorb iron, manganese, and hydrogen sulfide gas from your water and trap it within the filter. Approximately every 1-5 days*, the automatic control valve will initiate a backwash cycle for approximately 20 minutes and rinse the trapped particles down a drain or elsewhere. The system will then automatically re-set itself to backwash for another 1-5 days*. In most cases, the backwash water can be reused for areas like irrigation since there are no harmful chemicals or salts in the water. *Backwash intervals depend on water chemistry and usage.
Iron and manganese are commonly found in well waters. They can cause unsightly staining, bad tastes and at high levels they can cause problems with fixtures, appliances, and heating elements. Both can be removed to leave the water crystal clear by using the Iron Max-FX.
Clear Clean water with the Space Saving Single Tank 5 in 1 Iron Max-FX well water treatment system.
- Unlike many Iron removal systems that require the use of chemicals, the whole house Iron Max-FX is chemical and maintenance free!
- Filters Iron (Ferrous & Ferric), Manganese, Hydrogen Sulfide Gas "rotten egg odor"!
- Filters Sediment to 3-5 Microns
- Reduces The Effects Of Hard Water Scale
- Prevents Staining on Bathroom & Kitchen Fixtures!
- No more iron in your washing Machine!
- Clothes are cleaner and whites are whiter!
- Prevents Staining on Dishes, Dishwasher!
- Prevents "Rotten Egg Smell" (i.e. Hydrogen Sulfide)
- Clearer water at every tap including showers!
- Higher Quality Drinking Water!
- Provides whole house filtered drinking water!
- No Routine filters to change!
- Simple to Install - Connects to the Main Supply Line of your House!
- The Iron Max-FX can be plumbed indoors or outdoors - must be kept from freezing temperatures
- The Iron Max-FX has a great warranty!
- For sulfur reducing bacteria removal we recommend chlorinating your well before installing this system. This is a fairly simple process in which we will supply easy to follow step by step instructions.
HOW THE IRON MAX-FX-10 WORKS
What is the Iron Max-FX used for?
The Iron Max-FX system has several uses. It is primarily used for well water residential applications where superior water is desired for both taste and functional use. These systems are capable of handling whole house iron filtration and stain prevention needs as well as high flow commercial applications, small and large-scale irrigation purposes, and is the perfect system to provide reliable pretreatment for a variety of filters that may otherwise be fouled by iron, such as reverse osmosis systems, UV disinfection systems, and a variety of our specialty filters. The Iron Max-FX is specially customized to include water conditioning for the prevention of hard water scale.
So how does the Iron Max-FX work?
Water flows into the valve at the top, down through the media and then up through the ‘riser’ tube in the middle of the vessel. As the water travels through the media the contaminants are removed leaving crystal clear water. The Iron Max-FX also includes an internal module to reduce the effects of hard water scale. There are timer options that can be set to automatically self clean (backwash) and wash away any of the accumulated contaminants. Cleaning can be set for a given time convenient to your lifestyle. It's as simple as that!
What exactly does the Iron Max-FX filter or remove?
The Iron Max-FX is a highly effective well water filter that simply requires a pH of 6.8 or greater for optimum performance. With this pH, the Iron Max will filter high levels of Ferrous and Ferric Iron up to 12ppm (mg/L), Manganese up to 5ppm (mg/L), Hydrogen Sulfide Gas up to 3ppm (mg/L), Sediment down to 3-5 microns, as well as unpleasant tastes and odors. Unlike many basic iron filters, this system is often used successfully to remove high levels of iron with no added chemical oxidation step. However, the addition of an oxidizer (e.g. oxygen, chlorine, ozone, hydrogen peroxide, potassium permanganate, etc.) can actually enhance the Iron Max's filtration performance. As such it is a very versatile system that can work with various water chemistry.
Will the Iron Max-FX Series soften water?
No, the Iron Max-FX Series is designed as a water conditioner as well as an iron, manganese, hydrogen sulfide gas, and suspended solids filter. To "soften water" you actually have to remove the calcium and magnesium hard water minerals. The Iron Max-FX Series does not remove the calcium or magnesium, so you will not have soft water or that "slimy" water that is associated with soft water. These systems are alternatives to salt based water softeners and perfect for customers who live in banned water softener areas or just want to Go Green! The built-in no salt magnetic module is designed to reduce the effects of hard water without chemicals.
Is there any routine maintenance involved with the Iron Max-FX?
No, the Iron Max-FX is considered a maintenance free whole house water filter. That is, there are no routine filters to replace and no chemicals or salts to add. The Iron Max will filter and clarify your water by filtering iron, manganese, hydrogen sulfide gas, and suspended solids in the water. It will also improve the taste & odor of your water. The filtration media will need to be exchanged approximately every 8 to 10 years*. This is easily accomplished with the use of a wet & dry vacuum which you use to vacuum out the old filtration media from the top of the filter. You then replace it with a new bed of filtration media which will last approximately another 8 to 10 years*. This is the only maintenance that the system will require. *Some applications may require a more frequent replacement interval. Note: The Iron Max will not treat tannins, iron bacteria, sulfur reducing bacteria, colloidal iron, or organic iron. If these bacteria's are present you will need to add an oxidizer or chlorinate your well to prevent any iron bacteria or sulfur reducing bacteria from passing through the Iron Max well water filter. Your Iron Max instructions will include easy to follow well chlorination instructions and detailed information on iron bacteria.
If the Iron Max does not use chemicals or sodium, what does it use?
Just water is needed for backwashing! The Iron Max System will oxidize and absorb iron, manganese, and hydrogen sulfide gas from your water and trap it within the filter. Approximately every 1-5 days*, the automatic control valve will initiate a backwash cycle for approximately 20 minutes and rinse the trapped particles down a drain or elsewhere. The system will then automatically re-set itself to backwash for another 1-5 days*. In most cases, the backwash water can be reused for areas like irrigation since there are no harmful chemicals or salts in the water. *Backwash intervals depend on water chemistry and usage.
Q: Why Buy From RainDance Water Systems? Compare:
A: 20+ years in the well water treatment industry - We design easy to maintain, affordable, reliable well water filter packages built to last - We offer a FREE transferable warranty with all Iron Max filters - Free delivery within the continental USA - Free water testing for as long as you own your water filter - 365 day expert technical support / customer service - After hours, weekend and holiday support included - Safe & secure online shopping experience or order over the phone - Tons of happy and satisfied customers worldwide - Check out our reviews to see why our customers love our products - We do not buy or solicit reviews or testimonials.
A: 20+ years in the well water treatment industry - We design easy to maintain, affordable, reliable well water filter packages built to last - We offer a FREE transferable warranty with all Iron Max filters - Free delivery within the continental USA - Free water testing for as long as you own your water filter - 365 day expert technical support / customer service - After hours, weekend and holiday support included - Safe & secure online shopping experience or order over the phone - Tons of happy and satisfied customers worldwide - Check out our reviews to see why our customers love our products - We do not buy or solicit reviews or testimonials.
