4 Stage Pure Water Machine PT-4.0/P
SKU:
$575.00
$475.00
$475.00
On Sale
per item
Attached Booster Pump! Our # 1 Pick For Under The Sink Well Water Reverse Osmosis System - Also Perfect For Premium City Water Filtration Too! The Prefect 4 Stage Reverse Osmosis Low Pressure / High TDS Solution - Auto Flush Included !
Now Includes:
(1) Handheld TDS Total Dissolved Solids Tester.
(1) Free Replacement Filter Package: Package includes filter wrench, instructions, 1-Sediment Filters and 2-Carbon Filters.
Free Shipping Within The Continental USA
Now Includes:
(1) Handheld TDS Total Dissolved Solids Tester.
(1) Free Replacement Filter Package: Package includes filter wrench, instructions, 1-Sediment Filters and 2-Carbon Filters.
Free Shipping Within The Continental USA
Our # 1 Pick For POU Well Water Drinking Water Filtration - Also Perfect For Premium City Water Filtration Too!
The Premium Reverse Osmosis Low Pressure / High TDS Solution - Auto Flush Included !
Model # Pure Water Machine PT-4.0/P - The Low Pressure Solution - The booster pump provides needed pressure.
Use this system when the water pressure is below 40-psi. This happens in many towns and villages, and also with well water systems. The booster pump allows the system to run at peak efficiency by providing a pressure of 80psi to the RO membrane.The pump is placed after the first stage sediment filter to reduce wear from sediment. The pump motor operates at 24volts D.C. and is supplied with a step-down transformer which plugs into a standard 110-volt outlet (220 volt available). A pressure switch is located on the line to the storage tank which turns the pump OFF when the tank pressure is 40-psi and ON at 25-psi.
Special AUTOFLUSH Included ! Autoflush prolongs the life of the RO membrane, especially in areas with high TDS, sediment load and hardness. Each time the pump turns on, the autoflush valve opens to permit full flow to the drain for 20-seconds, flushing the inside of the membrane of any built up contaminants. This reduces plugging of the membrane and ensures efficient rejection of TDS for a longer period of time. RECOMMENDED FOR WATER OVER 500 TDS
Approved by testing by the Water Quality Association to ANSI/NSF-58 & Gold Sealed approved. Certified to reduce contaminants: Arsenic, Barium, Cadmium, Chromium III & VI, Copper, Lead, Nitrate, Nitrite, Selenium, Radium 226 & 228,Fluoride,Turbidity,Cysts,TDS, Tested for structural integrity, chemical extraction and reduction of contaminants
Model # Pure Water Machine PT-4.0/P Specifications:
Produces *36 gallons per day
Storage Tank: 4 Gallon Total Volume: 2.5 gallon water volume
Pre-Filter: 10" sediment 5 micron
Second Pre-Filter: 10" carbon block
Reverse Osmosis Membrane: *36 GPD TFC @ 65 PSI Pressure Differential
Post-Filter: 10" granular activated carbon in-line
Booster Pump: Flow through diaphragm pump, 24 volt DC 115 VAC/24 VDC 60 hz - Boosts system pressure to 80psi.
Feed Water Pressure: 45 PSI min/100 PSI max
Feed Water Temperature: 40F-100F
Feed Water pH: 3 min to 10 max
Iron max: .3ppm
Manganese max: 0.05ppm
The reverse osmosis unit measures approx.15.5"L x 7"W x 18"H; 4.0 gallon storage tank is 15-1/2" high and 11" in diameter; total system weighs approx. 32 lbs.
Production rate is based on input water temperature of 25 C (77 F). If your water is colder production will be lower.
The Premium Reverse Osmosis Low Pressure / High TDS Solution - Auto Flush Included !
Model # Pure Water Machine PT-4.0/P - The Low Pressure Solution - The booster pump provides needed pressure.
Use this system when the water pressure is below 40-psi. This happens in many towns and villages, and also with well water systems. The booster pump allows the system to run at peak efficiency by providing a pressure of 80psi to the RO membrane.The pump is placed after the first stage sediment filter to reduce wear from sediment. The pump motor operates at 24volts D.C. and is supplied with a step-down transformer which plugs into a standard 110-volt outlet (220 volt available). A pressure switch is located on the line to the storage tank which turns the pump OFF when the tank pressure is 40-psi and ON at 25-psi.
Special AUTOFLUSH Included ! Autoflush prolongs the life of the RO membrane, especially in areas with high TDS, sediment load and hardness. Each time the pump turns on, the autoflush valve opens to permit full flow to the drain for 20-seconds, flushing the inside of the membrane of any built up contaminants. This reduces plugging of the membrane and ensures efficient rejection of TDS for a longer period of time. RECOMMENDED FOR WATER OVER 500 TDS
Approved by testing by the Water Quality Association to ANSI/NSF-58 & Gold Sealed approved. Certified to reduce contaminants: Arsenic, Barium, Cadmium, Chromium III & VI, Copper, Lead, Nitrate, Nitrite, Selenium, Radium 226 & 228,Fluoride,Turbidity,Cysts,TDS, Tested for structural integrity, chemical extraction and reduction of contaminants
Model # Pure Water Machine PT-4.0/P Specifications:
Produces *36 gallons per day
Storage Tank: 4 Gallon Total Volume: 2.5 gallon water volume
Pre-Filter: 10" sediment 5 micron
Second Pre-Filter: 10" carbon block
Reverse Osmosis Membrane: *36 GPD TFC @ 65 PSI Pressure Differential
Post-Filter: 10" granular activated carbon in-line
Booster Pump: Flow through diaphragm pump, 24 volt DC 115 VAC/24 VDC 60 hz - Boosts system pressure to 80psi.
Feed Water Pressure: 45 PSI min/100 PSI max
Feed Water Temperature: 40F-100F
Feed Water pH: 3 min to 10 max
Iron max: .3ppm
Manganese max: 0.05ppm
The reverse osmosis unit measures approx.15.5"L x 7"W x 18"H; 4.0 gallon storage tank is 15-1/2" high and 11" in diameter; total system weighs approx. 32 lbs.
Production rate is based on input water temperature of 25 C (77 F). If your water is colder production will be lower.
Vertex Pure Water Machine PT-4.0/P Reverse Osmosis Replacement Packages
Vertex PT-4.0/P FK-100 Replacement Filter Kit
Filter Replacement Package for the Vertex PT-4.0/P: Package includes filter wrench, instructions, 1-Sediment Filters and 2-Carbon Filters. Sediment & Carbon Filter should be changed every 9- 12 months.
|
Vertex PT-4.0/P M-4009 Replacement Membrane
Replacement Membrane for the Vertex PT-4.0/P Reverse Osmosis System: Package contains 1-TFC 36 gallon per day Membrane. Membrane should be changed every 3-4 years
|
