Non-Electric RDWS-NS-10NE Sediment Filter
SKU:
$1,395.00
$995.00
$995.00
Off-The Grid Water Treatment
RainDance Water Systems Non-Electric RDWS-NS-10NE Sediment Sand Filter - Designed for Off-The-Grid Uses, Homes, Cabins, Cottages, Growers & Irrigation
Read about the RDWS-NS-10NE premium features and specifications below.
Free Shipping Within The Continental USA
RainDance Water Systems Non-Electric RDWS-NS-10NE Sediment Sand Filter - Designed for Off-The-Grid Uses, Homes, Cabins, Cottages, Growers & Irrigation
- 3-5 micron Sediment Filtration
- Service Flow Rate 8gpm
- Free lifelong water testing to maintain optimum performance.
- Ships pre-loaded with media for hassle-free, quick & easy installation!
- Limited Time Special: Add our exclusive RDWS-NS Dealer Kit to your order! Find out what's inside our dealer kit by scrolling down this page.
Read about the RDWS-NS-10NE premium features and specifications below.
Free Shipping Within The Continental USA
The RDWS-NS Series: Sand & Sediment Filters. These low-maintenance systems are completely chemical and salt free. In other words they do not require salt pellets or chemicals for backwashing. Designed for whole house, seasonal cabin, vacation homes, off-the grid uses, growers, and irrigation applications. Our RDWS-NS Series provides filtration down to 3-5 microns. RainDance Water Systems RDWS Sediment Filters can be used on any domestic or industrial application where optimum sediment and turbidity removal is required.
Model # RDWS-NS-10NE - Well Water Sand, Sediment, and Turbidity Non-Electric Filter (appearance & color may vary from picture)
Model # RDWS-NS-10NE - Well Water Sand, Sediment, and Turbidity Non-Electric Filter (appearance & color may vary from picture)
|
Dimensions & Specifications:
|
No chemicals need for regeneration! No salt needed for backwashing! No costly cartridges to change! Filters sand, silt, sediment down to 3-5 microns Long lasting media up to 3-5* years *Some applications may require more frequent intervals dependent on water chemistry and usage. Filter media does not add any harmful chemicals to the water Filter Media is Certified NSF /ANSI Standard 61 |
How does the Non-Electric Sediment Filter work?
Energy-saving water filtration has never been easier! Water flows into the valve at the top, down through the media and then up through the ‘riser’ tube in the middle of the vessel. As the water travels through the media the sediment and suspended solids are removed leaving crystal clear water. The beauty of the RDWS-NS-10NE is that it uses no chemicals, there is no salt to add, and in most cases the backwash water can be reused for landscape or other watering. The manual non-electric control valve is simple to operate; once the system needs backwashing just move lever to the backwash position, then rinse position, then back to the service position.
Clear Clean water with the Space Saving Single Tank Non-Electric Sediment System well water treatment system.
Energy-saving water filtration has never been easier! Water flows into the valve at the top, down through the media and then up through the ‘riser’ tube in the middle of the vessel. As the water travels through the media the sediment and suspended solids are removed leaving crystal clear water. The beauty of the RDWS-NS-10NE is that it uses no chemicals, there is no salt to add, and in most cases the backwash water can be reused for landscape or other watering. The manual non-electric control valve is simple to operate; once the system needs backwashing just move lever to the backwash position, then rinse position, then back to the service position.
Clear Clean water with the Space Saving Single Tank Non-Electric Sediment System well water treatment system.
- Provides POE (point of entry) filtration wherever you need it!
- No Routine filters to change!
- Simple to Install - Connects to the Main Supply Line of your House!
- The Non-Electric Sediment System can be plumbed indoors or outdoors! *Must be kept from freezing temperatures
- The Non-Electric Sediment System has a great warranty!
- The Non-Electric Sediment System is considered a low-maintenance point of entry filtration system. There are no routine filters to replace and requires no chemicals. The Non-Electric Sediment System will filter and clarify your water by filtering sediment, turbidty and suspended solids in the water. The Non-Electric Sediment System is controlled by a manual backwashing control valve which simply requires the user to move the lever to the backwash position, the rinse position, and back to the service position. The filtration media will need to be exchanged approximately every 3 to 5 years*. This is easily accomplished with the use of a wet & dry vacuum which you use to vacuum out the old filtration media from the top of the filter. You then replace it with a new bed of filtration media which will last approximately another 3 to 5 years*. This is the only media maintenance that the system will require. *Some applications may require more frequent intervals dependent on water chemistry and usage.
